Products Application About us

Home Ownway News

Model props installation method

2017-07-31 09:02:00 

Guangzhou Ownway Display Equipment Co., Ltd. to teach you clothing model props installation method:

Model props

① Install the model base: Install the support on the chassis with the hex key (first tighten the screw and tighten the cap, the screws must be tightened, otherwise the model will tilt easily).

② re-install the lower body: the thigh at the bottom of the lower leg of the shaft hole, rotate 45 degrees to the anastomosis, and then the model of the lower body into the base.

③ the final installation of the upper body: the upper part of the shaft hole aligned lower body convex axis insert, rotate 45 degrees to the anastomosis, then the palm of your hand at the bottom of the arm axis, rotating 45 degrees to the anastomosis, and then arm into the shoulder.

2. how to wear clothes for models?

① wear pants: If the model of the two legs open distance is relatively large, first to remove one of the legs, respectively, put two legs into the pants, then the legs installed. If the model is not the distance between the two legs, do not have to break the legs, you can wear pants directly.

② put on the coat: If you do not open the chest with a button coat, the first clothes from the head into the set, then remove the two arms, respectively, into the sleeves can be, if it is open chest buttoned coat, You can put the side of the sleeve to wear, then the other side of the arm removed, and then into another sleeve can be (fingers open, before wearing the palm of your hand).

③ put on, buckle buttons or pull the zipper, and then finishing the clothes.

Guangzhou Ownway Display Equipment Co., Ltd. business philosophy is "to create the best service" for the service customers to receive orders from the production, packaging, transportation, export all the services of the process. E-Mail:

Users' hot comments